vacaero resources - Vacuum service, technology, brazing, pump and Metallography Blogs


by Joseph

Canadian Operations

VAC AERO INTERNATIONAL INC

vathermal

Ontario Thermal Processing Division Contact VAC AERO

Heat Treating, Brazing & Engineering Services

1371 Speers Rd., Oakville, Ontario, Canada, L6L 2X5
Tel: 905-827-4171 / Fax: 905-827-8303

{mosmap text=’1371 Speers Rd Oakville, ON, Canada’|mosmap address=’street, zipcode place,country’|dir=’1|address=’1371 Speers Rd Oakville, ON, Canada’}

Driving Directions:

From Pearson (Toronto) International Airport:

Exit Airport by following signs for Hwy 427 South to Hwy 401 west. Follow Hwy 401W to Hwy 403 (QEW). Follow Hwy 403 to the Queen Elizabeth Way (QEW) Hamilton. Exit QEW at Third Line Road south in Oakville.

To get to Plants 1, 2 & 3 (Thermal Processing, Head Office and Furnace Manufacturing), follow Third Line Road south to Speers Road. Turn left (east) on Speers Road. Plants 1 & 2 are about 1/2 km east of Third Line Road on the left (north) side of Speers Road. Plant 3 is also on the north side of Speers Road just east of Plants 1 & 2.

From Hamilton/Niagara/Buffalo:

Follow signs to QEW Toronto and exit at Third Line Road. Refer to additional directions above.

HOTELS IN THE AREA (FOR PLANTS 1, 2 & 3)


vafurnace

Ontario Furnace Manufacturing Division Contact VAC AERO

Furnace Equipment Manufacturing, Maintenance & Rebuild Services

4151 Mainway, Burlington, Ontario, Canada, L7L 5N9
Tel: 905-336-0673 / Fax: 905-336-3221

{mosmap text=’4151 Mainway, Burlington, ON, Canada’|mosmap address=’street, zipcode place,country’|dir=’1|address=’4151 Mainway, Burlington, ON, Canada’}

Driving Directions:

From Pearson (Toronto) International Airport:

Exit Airport by following signs for Hwy 427 South to Hwy 401 west. Follow Hwy 401W to Hwy 403 (QEW). Follow Hwy 403 to the Queen Elizabeth Way (QEW) Hamilton. Exit QEW at Appleby Line north in Burlington. On Appleby turn left on Mainway until you reach 4151 Mainway.

From Hamilton/Niagara/Buffalo:

Follow signs to QEW Toronto and exit north at Walkers Line. On Walkers Line turn right on Mainway until you reach 4151 Mainway.


vathermal

Quebec Thermal Processing Division Contact VAC AERO

Heat Treating & Brazing Services

7450 Rue Vérite, St. Laurent, Quebec, Canada, H4S 1C5
Tel: 514-334-4240 / Fax: 514-334-6269

{mosmap text=’7450 Rue Verite Saint-Laurent, QC, Canada’|mosmap address=’street, zipcode place,country’|dir=’1|address=’7450 Rue Verite Saint-Laurent, QC, Canada’}

Driving Directions:

Exit Dorval Airport toward Montreal. When leaving the airport property, drive very slowly so as not to miss the exit for Highway 520 (Côte de Liesse). Follow Highway 520 to the exit for Montée de Liesse. Follow the exit back under Highway 520 towards Montée de Liesse. Follow Montée de Liesse to Chemin St-Francois. Refer to the map for final directions to VAC AERO.



vathermal

Quebec Coatings Division Contact VAC AERO

Thermal Spray, Inorganic & Pack Coatings

1365 Newton St., Boucherville, Quebec, Canada, J4B 5H2
Tel: 450-449-4612 / Fax: 450-641-6590

{mosmap text=’1365 Rue Newton Boucherville, QC, Canada’|mosmap address=’street, zipcode place,country’|dir=’1|address=’1365 Rue Newton Boucherville, QC, Canada’}

Driving Directions:

Coming from the Island of Montreal you can either take the Champlain bridge or the Lafontaine tunnel. Once you are on the south shore follow the directions to route 20 towards Quebec city and the take the Nobel street exit to Newton street.





Leave a Reply